---
title: "Fitlock Stainless steel/Galvanized 2"
id: "82562"
type: "prodotto"
slug: "fitlock-inox-zincato-2"
published_at: "2026-11-16T12:02:08+00:00"
modified_at: "2026-11-17T08:35:19+00:00"
url: "https://www.fitlock.it/en/product/fitlock-inox-zincato-2/"
markdown_url: "https://www.fitlock.it/en/product/fitlock-inox-zincato-2.md"
taxonomy_fitlock_product:
  - "Fitlock"
---

Item FLI2

# Fitlock Stainless steel/Galvanized

## Press-fit fastening for wall and ceiling panels

A stainless steel system designed for applications requiring non-combustible materials, a minimal gap between panel and substrate, and the possibility of using thin panels.

[Request information](#contact-us)
[Technical sheet](#technical-data)

## The integrated washer protects the fastening point.

This configuration integrates the washer directly into the female component, which is recessed into the panel. The solution protects the system during handling and transport, keeping the fastening element protected and recessed within the panel.

The system consists of two components: the female component installed in the panel and the male component fixed to the substrate. The connection is made by applying pressure.

### Non-combustible

Stainless steel components for applications requiring non-combustible materials.

### 3 mm adjustment

Multidirectional adjustment for easier positioning.

### Reduced gap

Thin flanges and a low profile to minimize the distance from the substrate.

### Thin panels

Suitable for panels with a minimum thickness of 9 mm.

## 3 mm Adjustment in all directions.

The system configuration allows 3 mm of adjustment in all directions, facilitating correct positioning and alignment of the panels.

## Designed for environments with specific requirements.

Fitlock Inox is designed for installing ceiling and wall panels in environments where non-combustible materials are required.

### Marine

### Construction

### Automotive

### Furniture

### Aerospace

## Low profile. Reduced distance between panel and substrate.

Thanks to its thin flanges and low-profile fastening system, Fitlock Inox minimizes the distance between the panel and the substrate.

It is suitable for thin panels, with a minimum thickness of 9 mm.

## Two retention levels for different application requirements.

The system is available in Soft and Hard versions, featuring two male component configurations to adapt the retention force to different application requirements.

Soft

### FLI2S configuration

**Normal force required for disengagement: 120 N ±10%**

Hard

### FLI2H configuration

**Normal force required for disengagement: 120 N ±10%**

## Two installation configurations.

The technical datasheet illustrates the 2 mm Gap and No Gap configurations, along with their respective installation cross-sections.

**2 mm Gap**  
 Installation with a 2 mm gap.

**No Gap**  
 Installation without an additional gap.

## Installation in three steps.

Install the female component in the prepared recess in the panel, ensuring correct positioning and alignment. Install the male component on the substrate using the designated fixing points. Bring the panel towards the substrate and engage the system by applying pressure.

### Pay attention to screw positioning

The technical datasheet specifies that the fixing holes of the male and female components must be offset by 60° to prevent the screws from overlapping.

## Dimensions and specifications.

The following data is taken from technical datasheet FLI01-2060929-IT.

| General specifications |  |
| --- | --- |
| Item | FLI2 |
| Material | STAINLESS STEEL/GALVANIZED STEEL |
| Adjustment | 3 mm in all directions |
| Recess diameter | Ø 29 mm |
| Flat dimensions | Ø 54 mm |
| Total weight | 20 g |
| Screws to use | Flat countersunk head Ø 2.5 mm |
| Minimum panel thickness | 9 mm |

| Component | Soft | Hard |
| --- | --- | --- |
| Male | FLI2_M | FLI2_MH |
| Female | FLI2_F | FLI2_F |
| Complete assembly | FLI2S | FLI2H |
| Normal force required for disengagement | 120 N ±10% | 120 N ±10% |

[Technical sheet](#)

[Price list](#)

##### Technical Sheet

[Log In for immediate download](#)

##### Price list

[Log In for immediate download](#)

## Official Reseller

[Discover more](https://www.fitlock.it/en/where-to-buy/)

## We **support** you in **your** project

### Request information on Fitlock Stainless steel/Galvanized 2

## Discover also

[Fitlock Stainless Steel/Galvanized](https://www.fitlock.it/en/product/fitlock-stainless-steel-galvanized/)
[Fitlock Stainless Steel/Galvanized Free](https://www.fitlock.it/en/product/fitlock-stainless-steel-galvanized-free/)
[Fitkite](https://www.fitlock.it/en/product/fitkite/)
[Mini Fitlock Evo](https://www.fitlock.it/en/product/mini-fitlock-evo/)
[Mini Fitlock](https://www.fitlock.it/en/product/mini-fitlock/)

## FAQ

### Questions? Answers.

### What is Fitlock Inox FLI2?

It is a stainless steel press-fit fastening system designed for installing ceiling and wall panels.

### Why choose the Inox version?

It is designed for environments where non-combustible materials are required. The technical datasheet also specifies a reduced gap between the panel and the substrate and suitability for thin panels.

### What is the minimum panel thickness?

Fitlock Inox is suitable for thin panels, with a minimum thickness of 9 mm.

### How much adjustment does the system allow?

The system allows 3 mm of adjustment in all directions.

### Which versions are available?

The system is available in Soft and Hard versions, featuring two different male component configurations.

### Which installation configurations are available?

The technical datasheet illustrates two configurations: 2 mm Gap and No Gap.

### How should the fixing holes be positioned?

The fixing holes of the male and female components must be offset by 60° to prevent the screws from overlapping.

[#](#)

##### Contact Us

##### Sign up

Account valid also for the [e-commerce](https://www.fitlock.store/en/)

[Do you already have an account? Login](#)

##### Login

The email entered does not appear in our systems. Please check its accuracy or [Sign Up](#)

[Don't have an account yet? Sign Up](#)
